Visual Productions forum

Author Topic: CueCore2 Master/Slave  (Read 40 times)

February 07, 2018, 05:25:09 PM
Read 40 times

Jesper

  • Member
  • *
  • Posts: 2
Hello
I'm  new to the CueCore2 and wonder if you get 12 playbacks (zones) if you master/slave connect two units?

Regards Jesper

February 08, 2018, 09:58:20 AM
Reply #1

Guido Visser

  • Administrator
  • Member
  • *****
  • Posts: 156
    • Visual Productions
Hello Jesper,

The master/slave system will make the playbacks on both units play the same playbacks and cues. For example if the master is playing cue 3 of playback 1 then the slave will do the same.

I do not know your setup. But if you use a playback per zone you can use to the playbacks without master/slave. This allows you control all zones independently for each other. If you want multiple zones to be "grouped" together you can use master/slave.

Best regards,
Guido
« Last Edit: February 08, 2018, 10:00:50 AM by Guido Visser »
Guido Visser
Visual Productions BV

February 08, 2018, 04:00:36 PM
Reply #2

Jesper

  • Member
  • *
  • Posts: 2
Dear Guido
Thank you for the info. So if I understand correct there is no way I can get 12 independent playbacks when I use two CueCore2?

Is there any other way to get more than 6 playback (independent zonez)?

All the best
Jesper

February 08, 2018, 04:18:52 PM
Reply #3

Guido Visser

  • Administrator
  • Member
  • *****
  • Posts: 156
    • Visual Productions
Hello Jesper,

Every CueCore2 has 6 playbacks. A playback is used to play a scene. Which can be used to control a zone.

If you do not use master/slave the two CueCore2 can both control 6 zones. Combined 12 zones.

Best regards,
Guido
Guido Visser
Visual Productions BV