Hello everybody, I hope someone can help me with this annoying problem:
For a small school theater production I use regular dimmerpacks side by side with LED fixtures.
I set the LED fixtures to one color (for example red) and create a scene.
Then I set them to another color (for example green) and create another scene.
If I pull up both faders, I will get orange, but I can also get all the shades in between by moving the faders up and down.
This behaviour is just as I would expect it.
Now comes my problem:
If I create a scene that also includes a conventional dimmer, the colors of the second scene I want to fade in immediately jump to the intensity that the first scene currently has. This problem occurs, no matter if virtual dimmer is activated or not. Without the virtual dimmer, the LED in the scene jumps to 100%, even if the fader of the scene is just on 1% and no other scene is active! (I don't need a virtual dimmer if I mix the LED or dimmerpack only scenes...)
I even went so far to put the DIMM value of the LED fixtures into a separate scene. But as soon as I activate a scene where LED and dimmerpacks are mixed, the colors jump again.
BTW: If I create a scene for the conventional dimmerpacks and scenes for the LED fixtures, I can use them all side by side and everything is mixed just perfectly. But I want to be able to fade scenes that are on just one fader.
So: am I missing something or is this just a very annoying bug?
Thanks in advance for your help!
Edit: Cuelux 1.3.97 on Mac OS 10.11.6