Visual Productions forum

Author Topic: moving head home stand  (Read 1710 times)

February 13, 2016, 10:13:22 PM
Read 1710 times

Robin s

  • Member
  • *
  • Posts: 18
Hey i have made with v builder a program for my mh but when i start the cuety app my mh automatic stands in the middle position . It's mean the light shine to the roof , (tilt : 0 pan 0 ) .
But normally with a dmx scenesetter panneel is the position of the mh with zero position to the centre of the ground . Tis is much better
i have now the problem that when i the fx take the mh to the roof shine's . Example circle : mh shine's circles but to the roof not in front of hem . Please help me , i have in builder de degrees from 630 pan to 530 degrees but it doesn't matter .
Or must i change the dmx channel from the pan tilt from 255 to 127 ?

February 15, 2016, 08:42:26 AM
Reply #1

Julien Levaufre

  • Administrator
  • Member
  • *****
  • Posts: 3231
    • www.visualproductions.nl
this kind of home position is a standard in the professional light contrlers. if you need your fx to be centered in an other place you just need to change the position onformation on the grip of the programmer.. this position will become the new center of the fx.
Julien Levaufre
Visual Productions BV

 

SMF spam blocked by CleanTalk